подскажитеможет знаете в чем может быть дело…

з.ы. предплагаю что проблема с б/д но логин и пароль правильные…

if ($dns_strict_tld_check == «1″ && !in_array($hostname_labels[$label_count-1], $valid_tlds)) {
error(ERR_DNS_INV_TLD); return false;
}

и все добавилось. Неграмотно конечно, но работоспособно, теперь проверку надо самому делать.

Устанавливаем PowerDNS recursor:

aptitude install pdns-recursor

Теперь настраиваем:

Сначала сам pdns:

mcedit /etc/powerdns/pdns.conf

# Разрешить передачу с …
allow-axfr-ips=0.0.0.0/0

#Разрешить запросы с..
allow-recursion=0.0.0.0/0

# Указываем какие ИП слушать
# если вы не используете recursor то можно поставить 0.0.0.0 (все интерфейсы)
local-address=свои адреса или адрес

# Порт который надо слушать
local-port=53

# Указываем на наш Recursor,
recursor=127.0.0.1

Теперь настраиваем PowerDNS-Recursor

mcedit /etc/powerdns/recursor.conf

allow-from=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10

# Указываем Hint файл, его можно взять из BIND /var/named/etc/namedb /named.root,
# или скачать ftp://ftp.rs.internic.net/domain/root.zone.gz
hint-file=/usr/local/etc/pdns/root.zone

# Адрес который надо слушать указываем только 127.0.0.1, и нечего лишнего
local-address=127.0.0.1
# Порт который надо слушать, по умолчанию 53
local-port=53

max-tcp-clients=128

version-string=
PowerDNS Recursor 3.1.7 $Id: pdns_recursor.cc 1200 2008-06-14 21:11:33Z ahu $
Раскаментируйте если не будете менять ее, по умолчанию она закоментирована

Теперь все перезапустим
/etc/init.d/pdns restart
/etc/init.d/pdns-recursor restart

Делаем проверку
на машине клиентов выполняем команду
nslookup вашдомен

# Autogenerated configuration file template
#################################
# allow-axfr-ips If enabled, restrict zonetransfers to originate from these
# IP addresses
#
allow-axfr-ips=тут айпи 2 нс

#################################
# allow-recursion List of netmasks that are allowed to recurse
#
allow-recursion=127.0.0.1

#################################
# allow-recursion-override Local data even about hosts that don’t exist will
# override the internet. (on/off)
#
# allow-recursion-override=

#################################
# cache-ttl Seconds to store packets in the PacketCache
#
# cache-ttl=20

#################################
# chroot If set, chroot to this directory for more security
#
# chroot=/var/spool/powerdns

#################################
# config-dir Location of configuration directory (pdns.conf)
#
config-dir=/etc/powerdns

#################################
# config-name Name of this virtual configuration — will rename the binary image
#
# config-name=

#################################
# control-console Debugging switch — don’t use
#
# control-console=no

#################################
# daemon Operate as a daemon
#
daemon=yes

#################################
# default-soa-name name to insert in the SOA record if none set in the backend
#
# default-soa-name=a.misconfigured.powerdns.server

#################################
# disable-axfr Disable zonetransfers but do allow TCP queries
#
disable-axfr=no

#################################
# disable-tcp Do not listen to TCP queries
#
# disable-tcp=no

#################################
# distributor-threads Default number of Distributor (backend) threads to start
#
# distributor-threads=3

#################################
# fancy-records Process URL and MBOXFW records
#
# fancy-records=no

#################################
# guardian Run within a guardian process
#
guardian=yes

#################################
# launch Which backends to launch and order to query them in
#
# launch=
launch=gmysql

#################################
# lazy-recursion Only recurse if question cannot be answered locally
#
lazy-recursion=yes

#################################
# load-modules Load this module — supply absolute or relative path
#
# load-modules=

#################################
# local-address Local IP address to which we bind
#
local-address=тут мой внешний айпи

#################################
# local-ipv6 Local IP address to which we bind
#
# local-ipv6=

#################################
# local-port The port on which we listen
#
local-port=53

#################################
# log-dns-details If PDNS should log failed update requests
#
# log-dns-details=

#################################
# log-failed-updates If PDNS should log failed update requests
#
# log-failed-updates=

#################################
# logfile Logfile to use
#
# logfile=/var/log/pdns.log

#################################
# logging-facility Log under a specific facility
#
# logging-facility=

#################################
# loglevel Amount of logging. Higher is more. Do not set below 3
#
# loglevel=4

#################################
# master Act as a master
#
# master=no

#################################
# max-queue-length Maximum queuelength before considering situation lost
#
# max-queue-length=5000

#################################
# max-tcp-connections Maximum number of TCP connections
#
# max-tcp-connections=10

#################################
# module-dir Default directory for modules
#
module-dir=/usr/lib/powerdns

#################################
# negquery-cache-ttl Seconds to store packets in the PacketCache
#
# negquery-cache-ttl=60

#################################
# out-of-zone-additional-processing Do out of zone additional processing
#
# out-of-zone-additional-processing=no

#################################
# query-cache-ttl Seconds to store packets in the PacketCache
#
# query-cache-ttl=20

#################################
# query-logging Hint backends that queries should be logged
#
# query-logging=no

#################################
# queue-limit Maximum number of milliseconds to queue a query
#
# queue-limit=1500

#################################
# query-local-address The IP address to use as a source address for sending
# queries.
# query-local-address=

#################################
# receiver-threads Number of receiver threads to launch
#
# receiver-threads=1

#################################
# recursive-cache-ttl Seconds to store packets in the PacketCache
#
# recursive-cache-ttl=10

#################################
# recursor If recursion is desired, IP address of a recursing nameserver
#
# recursor=

#################################
# setgid If set, change group id to this gid for more security
#
setgid=pdns

#################################
# setuid If set, change user id to this uid for more security
#
setuid=pdns

#################################
# skip-cname Do not perform CNAME indirection for each query
#
# skip-cname=no

#################################
# slave Act as a slave
#
# slave=no

#################################
# slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds
#
# slave-cycle-interval=60

#################################
# smtpredirector Our smtpredir MX host
#
# smtpredirector=a.misconfigured.powerdns.smtp.server

#################################
# soa-minimum-ttl Default SOA mininum ttl
#
# soa-minimum-ttl=3600

#################################
# soa-refresh-default Default SOA refresh
#
# soa-refresh-default=10800

#################################
# soa-retry-default Default SOA retry
#
# soa-retry-default=3600

#################################
# soa-expire-default Default SOA expire
#
# soa-expire-default=604800

#################################
# soa-serial-offset Make sure that no SOA serial is less than this number
#
# soa-serial-offset=0

#################################
# socket-dir Where the controlsocket will live
#
socket-dir=/var/run

#################################
# strict-rfc-axfrs Perform strictly rfc compliant axfrs (very slow)
#
# strict-rfc-axfrs=no

#################################
# urlredirector Where we send hosts to that need to be url redirected
#
# urlredirector=127.0.0.1

#################################
# use-logfile Use a log file
#
# use-logfile=yes

#################################
# webserver Start a webserver for monitoring
#
# webserver=no

#################################
# webserver-address IP Address of webserver to listen on
#
# webserver-address=127.0.0.1

#################################
# webserver-password Password required for accessing the webserver
#
# webserver-password=

#################################
# webserver-port Port of webserver to listen on
#
# webserver-port=8081

#################################
# webserver-print-arguments If the webserver should print arguments
#
# webserver-print-arguments=no

#################################
# wildcard-url Process URL and MBOXFW records
#
# wildcard-url=no

#################################
# wildcards Honor wildcards in the database
#
# wildcards=

#################################
# version-string What should PowerDNS return for version
# allowed methods are anonymous / powerdns / full / custom
version-string=powerdns

include=/etc/powerdns/pdns.d